3D-Printed Parts for Chevrolet Racing




Chevrolet Corvette C8.R, INDYCAR, Chevrolet Silverado race truck and NASCAR Chevrolet Camaro has been equipped with 3D-printed parts. 3D printing has taken on a powerful role in Chevrolet Motorsports, both on-road and off-road. This season, the Chevrolet Corvette C8.R, INDYCAR, NASCAR Chevrolet Camaro and Chevrolet Silverado race teams have accumulated more than 80,000 miles of competition in vehicles built with 3D-printed parts. 

Chevrolet Corvette C8.R with 3D-printed parts.
Chevrolet Corvette C8.R with 3D-printed parts.

Chevrolet, from motorsports to production

“Chevrolet has a long history of technology transfer between our motorsports and production teams, and this is a perfect example of our approach,” said Jim Campbell, GM U.S. Vice president of Performance and Motorsports. “GM’s 3D-printing capability speeds up our learning cycles and, in turn, these racetrack experiences help our additive manufacturing team move one step closer to using 3D-printed parts in production vehicles.” Two all-new mid-engine Corvette race cars, both Chevrolet Corvette C8.Rs, debuted at Rolex 24 at Daytona on Jan. 25, 2020, each equipped with 75 3D-printed parts, including the oil tank, tank inlet and cap, air conditioning driver cooling box and integrated hydration system, power steering pump bracket and headlight assemblies. Fifty of these parts were designed or printed in-house by GM. Since then, the Chevrolet Corvette C8.Rs have accumulated nearly 8,000 miles of competition in seven races. Corvette Racing has had a dominant 2020 season, taking home five first-place wins and three 1-2 finishes, including the punishing 2020 Cadillac Grand Prix of Sebring.

Chevrolet Corvette C8.R with 3D-printed parts.
Chevrolet Corvette C8.R with 3D-printed parts.

3D-Printed Parts for INDYCAR program

The INDYCAR program has also had great success leveraging 3D printing for the Chevrolet Indy V6. Components in the Chevrolet INDYCAR V6 exhaust system are 3D printed, which helps eliminate failure points in traditional manufactured components while increasing design freedom and reducing cost. Chevrolet INDYCAR engines have run over 60,000 miles since the season kicked off at Genesys 300 at Texas Motor Speedway in Fort Worth on June 6, 2020. 

3D-Printed Parts for Chevrolet Silverado off-road race truck

The Chevrolet Silverado off-road race truck debuted at the Best in the Desert Method Race Wheels Laughlin Desert Classic in October 2019. The Silverado competes in the 1200 Stock class, which limits changes to suspension, underbody and installation of race-safety equipment. As such, the Silverado has three 3D-printed parts made in-house by GM, including a rear damper shield made with carbon-fiber reinforced plastic, which protects the rear dampers from the rocky desert terrain. Since October 2019, the Silverado race truck has accumulated 900 miles of competition in six races. 

3D-Printed Parts for Chevrolet Silverado off-road race truck
3D-printed parts for Chevrolet Silverado off-road race truck.


3D-printed parts for Chevrolet Silverado off-road race truck.
3D-printed parts for Chevrolet Silverado off-road race truck.

3D-Printed Parts for Chevrolet Camaro ZL1 1LE

Chevrolet also switched to the Chevrolet Camaro ZL1 1LE for the 2020 NASCAR Cup Series, replacing the Chevrolet Camaro ZL1. Chevrolet engineers optimized the aerodynamic performance through extensive, full-scale wind-tunnel testing. Over 500 3D-printed prototype parts were used in testing to develop the new ZL1 1LE body. Additionally, the Chevrolet Camaro ZL1 1LE is equipped with a 3D-printed gear cooling duct, which has accumulated nearly 18,500 miles of competition in 27 races. “By utilizing 3D-printed parts, Chevrolet Motorsports is demonstrating the many benefits of additive manufacturing, including manufacturing efficiencies, mass reduction, parts consolidation, creativity and cost savings,” said Audley Brown, GM director, Materials Engineering, Additive Design and Manufacturing. “3D-printed parts can offer equal strength and durability to cast or milled components, which is critical for product development and design.”

About Chevrolet

Founded in 1911 in Detroit, Chevrolet is one of the world's largest car brands, doing business in more than 100 countries and selling more than 4.0 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature engaging performance, design that makes the heart beat, passive and active safety features and easy-to-use technology, all at a value. More information on Chevrolet models can be found at www.chevrolet.com.

Images archive: Chevrolet




Commenti

Articoli popolari

2021 Audi Q3 e Audi Q3 Sportback sono disponibili con nuovi allestimenti

Renault 5 GT Turbo: preparazione by CandelaSport

Motore Fiat Ritmo Abarth 130 TC - Motori italiani che hanno fatto scuola

Dodge Challenger 50th Anniversary Edition, il Gruppo Cavauto è l'unico a proporla in Italia

2020 Mercedes-Maybach Classe S, lusso senza compromessi

Volvo Cars, il simulatore di guida che utilizza la tecnologia dei videogiochi

Volvo Cars, progettazione e sviluppo dei motori elettrici

Lamborghini Jarama GT, 50 anni fa nasceva la berlinetta granturismo 2+2 di Sant'Agata Bolognese

La Fiat 127 e il motore 903

Mazda e il Kodo design di Ikuo Maeda